IQVIEW8 Installation Instructions TG201232 Issue 9, 30-May-2017. Applies to v1.30. 7
Installation Instructions IQVIEW8
4
Route Cables
3
Mount Chassis
2
Remove Gasket
Insert chassis in hole
4 places
Loosen locking screws
Adjust brackets
4 places
Tighten adjustment screws
Tighten locking fi xing screws
4 places
4 places
3.3 Installation - In a Dry Partition Wall
(continued)
Either:
into Rear of Chassis
Cables can be routed inside the wall and
into the rear of the chassis.
Or:
Bottom Edge
Cables can be routed inside the wall and
through the bottom edge of the chassis.
Or:
Top Edge
