Combi 65
The following symbol is used throughout this
manual:
IMPORTANT!
Please take note of comments.
Dear Customer
Thank you for purchasing this Trend product.
The Combi 65 is designed to be used with most
heavy duty plunge routers. The router should be
fitted with a 30mm outside diameter guide bush
and a 12.7mm (
1
/
2
”) diameter Tungsten Carbide
Tipped (TCT) cutter. Two 100mm throat quick
action or gripper clamps will also be required.
Once the jig has been mastered a typical
postform or butt and scribe joint, can be made
within 15 minutes including setting-up time.
Recommended maximum depth of cut is 8mm in
one pass. The jig is designed to cut worktop
widths at 600mm, 640mm and 650mm. Other
widths upto 650mm will require marking out or
redrilling of location holes.
If after reading these instructions you have any
problems please contact our Technical Support
Department. For accessories and a copy of the
latest Trend Routing Catalogue please contact
your nearest Trend stockist.
We hope you enjoy many years of productive
use of this product.
Please remember to return your
guarantee card within 14 days of
purchase.
-1-
Contents
Items Enclosed _______________________2
Safety Precautions ____________________3
– Cutter Care
__________________________3
– Useful Advice
________________________3
Accessories __________________________4
– Recommended Cutters
________________4
– Sub-base sets
______________________4-5
– Panel Butt Connectors
_________________6
– Biscuit Jointer for the router
_____________6
– Gripper Clamp
_______________________6
Assembly ____________________________7
– Location Bush Identification
_____________7
– Margin Distance
______________________7
– Setting out the joints
__________________7
Operation ____________________________8
– Setting the Length Stop
________________8
– Female Joint
_________________________8
– Male Joint
___________________________9
– Out-of-square Joints
___________________9
– Cutting the Bolt Recesses
_____________10
– Strengthening the Joint
_______________11
– Sealing the Joint
____________________11
Spare Parts
– Spare Parts List & Diagram
____________12
Trouble Shooting ____________________I/B
Please read the operating
instructions carefully and keep
them together with your jig.
If you require further technical information or spare parts for the
Combi, please call our technical support department on 01923 224681.
%
Содержание COMBI 65
Страница 1: ...COMBI 65 For 600mm 640mm 650mm Worktops...