Trend Micro viruswall enforcer 1500i, Руководство по установке и развертыванию

Страница: 61 / 78

Trend Micro™ Network VirusWall™ Enforcer 1500i Installment and Deployment Guide
4-2
Before Preconfiguration
Complete the following tasks before you preconfigure Network VirusWall Enforcer:
•
Test the failopen functionality. Network traffic should still pass through the device
after a hardware or system error or if the device loses power.
• Determine the password for the
admin
account.
Tip: There are two default accounts:
Admin
and
PowerUser
. These accounts use
admin
and
poweruser
, respectively, as their default passwords.
• Determine the host name for the device.
Verifying Network Support
In a failopen deployment, the total length of the network cable connecting regular ports
to other devices must not exceed 100 meters (~328 feet).
A cable longer than the maximum length will prevent failopen from working. See
Failopen Considerations on page 3-16 for more information.
Preparing for Preconfiguration
To prepare for preconfiguration, check if you have completed the instructions in Before
Preconfiguration on page 4-2 before starting with the succeeding steps.
Also, ensure that you can access Network VirusWall Enforcer directly. Before powering
on the device, attach the following peripherals:
•
VGA monitor
• Keyboard
Tip: For instructions on how to connect peripherals and power on the device, see
Installing
the Device
on page 2-15.