Trend Micro viruswall enforcer 1500i, Руководство по установке и развертыванию

Страница: 66 / 78

Preconfiguring Network VirusWall Enforcer
4-7
Host names may contain up to 30 alphanumeric characters without spaces. Trend
Micro recommends a unique descriptive host name to represent and identify the
device as seen through the management console. For example, designate
NVWE-NY-main
as the host name for a device protecting a New York main office.
3. Type or select the management IP address settings under Management IP settings.
Specify either the IPv4 or the IPv6 settings as necessary. When using Network
VirusWall Enforcer as a dual-stack host, provide both IPv4 and IPv6 settings.
WARNING! If there is a NAT device in your environment, Trend Micro recom-
mends assigning a static IP address to the device. Because different
port settings are assigned from your NAT, your device may not work
properly if dynamic IP addresses are used.
4. After specifying the network settings, press
ENTER
.
Enabling Ports and Selecting Port Functions
Depending on your desired deployment, you may need to enable certain ports and
specify their function. By default, only the regular ports are enabled. So, if you need to
use management or mirror port functionality, you need to enable the management ports,
which are ports 1 and 2.