-
8
-
Checking LED Indicators to Confirm Status
1
14
The LED on each Ethernet port shows the deployment status.
Hardware Bypass LED Indicators
1
15
1
15
The Bypass LED states and device statuses of each IPS port pair are shown below.
1-2
3-4
5-6
7-8
9-10
11-12
BP
1
2
3
4
PORT
5
6
7
8
9
10
11
12
Bypass LED State Device Status
No Light
Hardware bypass pair of ports is enabled
Turn on RED
Hardware bypass pair of ports is disabled
No Light
The EdgeIPS Pro 216 Rugged appliance cannot communicate with a
network.
MGMT/MR
Right LED
1 Gbps LINK/ACT (on = 1 Gbps link)
Right LED
100 Mbps LINK/ACT (on = 100 Mbps link)
Hardware bypass pair of ports is normal
Turn on Green
Right No Light 10 Mbps LINK/ACT (off = 10 Mbps link)
Left LED
GE LINK/ACT (off = no link, on = activity)
No Light
The EdgeIPS Pro 216 Rugged appliance cannot communicate with a
network.
HA
Left LED
GE LINK/ACT (off = no link, on = activity)
No Light
The EdgeIPS Pro 216 Rugged appliance cannot communicate with a
network.
RJ45
Left LED
GE LINK/ACT (off = no link, on = activity)
Right LED
1 Gbps LINK/ACT (on = 1 Gbps link)
Right LED
100 Mbps LINK/ACT (on = 100 Mbps link)
Right No Light 10 Mbps LINK/ACT (off = 10 Mbps link)
Right LED
1 Gbps LINK/ACT (on = 1 Gbps link)
Right LED
100 Mbps LINK/ACT (on = 100 Mbps link)
Right No Light 10 Mbps LINK/ACT (off = 10 Mbps link)
