52
N-Platform Hardware Installation and Safety Guide
Pin number
Signal name
8
Clear to Send (CTS)
RJ-45 Ethernet connectors
Describes how to use the RJ-45 connector under different operating conditions.
Use the following pinout information when your RJ-45 device is operating in 10Mbps/100Mbps mode.
Pin number
Signal name
1
Transmit positive (Tx+)
2
Transmit negative (Tx-)
3
Receive positive (Rx+)
4
Ground (GND)
5
Ground (GND)
6
Receive negative (Rx-)
7
Ground (GND)
8
Ground (GND)
Note:
These ports can auto-negotiate their mode and can automatically detect whether they should operate
in straight-through or cross-over mode.
Use the following pinout information when your RJ-45 device is operating in 1000Mbps (1GbE) mode.
Pin number
Signal name
1
Twisted Pair 1 positive (TP1+)
