Trend Micro CR100 Series, Инструкция и руководство по установке

Страница: 54 / 69

Preconfiguring Network VirusWall Enforcer
4-3
Also, ensure that you can access Network VirusWall Enforcer directly. Before powering
on the device, attach the following peripherals:
•
VGA monitor
• Keyboard
Tip: For instructions on how to connect peripherals and power on the device, see
Installing
the Device
on page 2-12.
Understanding Preconfiguration
Ensure that the tasks in Preparing for Preconfiguration on page 4-2 have been completed
before starting preconfiguration.
To perform preconfiguration:
1. Plan and determine the deployment strategy (see Deploying Network VirusWall
Enforcer on page 3-1).
2. Perform preconfiguration (see instructions in The Preconfiguration Console on page
4-3).
3. Perform configuration tasks (see Configuring Policy Enforcement and Device Settings in
the Administrator’s Guide ).
After completing the initial configuration tasks (see Preparing for Preconfiguration on page
4-2), use the Preconfiguration console to proceed.
The Preconfiguration Console
The Preconfiguration console lets you configure basic device settings directly using a
keyboard and a monitor. All initial configuration tasks, like specifying port functions and
the device IP address must be done through the Preconfiguration console.
The Preconfiguration console can also be accessed using an SSH client such as PuTTY.
However, before this can be done, you must configure the device IP address and ensure
that the device can connect to the network. For more information on accessing the
Preconfiguration console remotely, see the
Administrator’s Guide .