Trelock Vision LS 760 I-GO, Инструкция по эксплуатации

Страница: 20 / 28

TIME
The LS 760 I-GO® VISION display
constantly indicates the time during
lighting mode. A brief push of a but-
ton enables the time display to also
be activated for 10 seconds even if
the light is switched off.
The time is set manually:
1 Switch the LS 760 I-GO®
VISION on.
2 Activate the appropriate mode by
simultaneously pressing the
+
-
and
–
-buttons for approximately
3 seconds. A large H is shown on
the display.
3 Set the time using the
+
- and
–
-buttons.
4 Once the correct time has been
set, you can exit the setting
mode by simultaneously pres-
sing the - and
–
-buttons. After
a period of 10 seconds without
button activation, the mode is
exited automatically.
Note: If the battery has been fully
discharged, the time must be reset.
2 3 4
20