2.
Install the two ‘AAA’ batteries (included) as indicated by the polarity
markings.
3.
Replace the battery door and turn on your Trellie using the on/off switch on the bottom.
When Trellie is switched on, the front light flashes red one time.
Trellie uses Bluetooth wireless technology to connect to your mobile phone. To activate Bluetooth:
a.
iPhone®:
Go to Settings > General > Bluetooth and enable Bluetooth
b.
Android®:
Go to Settings > Wireless & Networks > Bluetooth Settings and enable Bluetooth
c.
Other Phones:
Go to Trellie.com/Pairing or review the user manual that came with your phone.
With both devices on and ready to pair (connect):
1.
Go to your phone’s Bluetooth settings page and select ADD, SEARCH or SCAN for devices.
2.
Press and hold the Trellie button (3 seconds) until the light begins flashing red/blue.
3.
Select ‘Trellie’ when it appears on your phone. If prompted for a PIN key enter 0000.
Once Trellie is connected, the red/blue light stops flashing and your phone should indicate that it is paired. If ‘Trellie’
does not appear on your phone, try selecting SCAN devices and then select ‘Trellie’ when it appears.
Note:
To pair Trellie to another phone, repeat these steps.
