Trelawny SF3EX, Руководство по эксплуатации и обслуживанию

Страница: 6 / 16

PAGE 6
SF3ex SCALING HAMMER
FOREWORD
GENERAL INFORMation
SAFETY
Thank you for your purchase of a Trelawny SF3Ex Scaling
Hammer. This manual contains the necessary maintenance
information for you to ensure proper operation and care for
this machine. Also see the manual that is supplied by the
engine manufacturer. It is essential for you to read through this manual thoroughly. In the unlikely event that you
experience problems with your Trelawny SF3Ex Scaling
Hammer, please do not hesitate to contact your local
Trelawny dealer or agent. We always welcome feedback and
comments from our valued customers.
Before operating Trelawny ATEX Scaling Hammers, this
manual must be read and understood by the operator, if in any
doubt, ask your supervisor before using this equipment. Local
safety regulations must be followed at all times. Failure to
follow these instructions could result in damage to the Scaler
and/or personal injury.
Trelawny SPT Ltd disclaims all responsibility for damage to
persons or objects arising as a consequence of incorrect
handling of the tool, failure to inspect the tool for damage or
other faults that may influence it’s operation prior to starting
work, or failure to follow the safety regulations listed or
applicable to the job site.
These scaling tools are designed for removal of heavy rust
and scale.
Do:
- Be aware that this tool is not electrically insulated.
- Be aware that the tool can create dust and flying debris.
- Keep hands and clothing away from moving parts.
- Be aware of others working around you.
- Ensure that this tool is lubricated daily.
- Store this tool in a secure and dry environment.
- Wear Personal Protective Equipment including safety
goggles, footwear, ear defenders and gloves. In some
environments it will be necessary to wear facemasks or
breathing apparatus.
- Always observe safe-working practices at all times.
Do not:
- Allow the tool to run unattended.
- Modify this tool in any way, this will invalidate the warranty
and could also lead to serious injury.
- Drag the tool by the air hose.
- Use petrol (gasoline), thinners or any other high flash point
solvent to clean the tool.
WARNING! Before operating, performing maintenance
or repairing the scaling hammers this manual must be
read and understood. If in any doubt, ask your supervisor
before using this equipment.
WARNING! Always observe safe-working practices at
all times.