HYDRAFLEX HOLD CLEANER
OPERATION & MAINTENANCE
Страница 1: ...HYDRAFLEX HOLD CLEANER OPERATION MAINTENANCE ...
Страница 2: ... and dry place Always observe safe working practices and local safety regulations at all times Never aim the Hydraflex hold cleaner at any person this equipment produces a very powerful jet of water and can cause serious injury if misused Do not operate the Hydraflex unless it is securely fixed to its tripod and situated on a flat surface Do not modify this tool in any way as this will invalidate ...
Страница 3: ...valve should now be adjusted carefully to produce a tight hard hitting jet of water Excessive air will cause the jet of water to break up and spread becoming less effective In an emergency or once cleaning has been completed close the air valve and instruct the second operator to shut off the water supply Disconnect the air and water hoses and wipe all deposits from the outside of the Hydraflex Re...
Страница 4: ...s model denominations part numbers and drawings Use only genuine Trelawny spares The use of non Trelawny spare parts invalidates the warranty At its maximum working distance of 30 metres the force of water on the surface being cleaned is approximately 10kg Recommended water pressure 6kg cm2 5 9 bar 85 psi Recommended air pressure 7kg cm2 6 9 bar 100 psi Estimated water consumption 454 lpm 100 gal ...