TrekStor i.Beat classico, Руководство по эксплуатации

Страница: 10 / 92

– 10 – – 10 –
OPERATING INSTRUCTIONS
Note: Please charge the
i.Beat classico
as described in these operating instructions for at least
3 hours before initial use.
1) Controls for the TrekStor
i.Beat classico
A Microphone
B OLED display
C  button (Record)
D  button
E  button
F  button
G  button (Folder navigation)
H  button (Mode)
I  button
J  button (on / off / play / pause)
K  button (Settings / Key lock)
L  button
M Headphone jack 1
N Loop for neck strap
O Headphone jack 2, line-in jack
P USB port
Note: To reset, carefully press the  button with a pointed object (such as an unbent paperclip). The
reset button is recessed deeply in the housing.
2) Connecting the TrekStor
i.Beat classico
to a PC
Note for users of Windows® 98: First install the drivers from the accompanying CD before connecting the
i.Beat classico
to your PC.
Use the included USB cable to connect the
i.Beat classico
to a USB port in your PC.
Your operating system will immediately recognize the
i.Beat classico
and will add a " D
EVICE
WITH REMOVABLE STORAGE
" under " M
Y
C
OMPUTER
".
3) Charging the TrekStor
i.Beat classico
The
i.Beat classico
starts charging as soon as you connect it to a PC. The battery is charged
after a maximum of three hours; charging automatically stops to prevent overcharging.
Note: The maximum battery life is only reached after approximately 10 charging cycles.
EN