EN
9
b
OPERATING INSTRUCTIONS
Thank you for buying the TrekStor DataStation. We are confident that this
product will be the source of much enjoyment. Please read the following
instructions carefully so that you can become acquainted with the functions
of this product and its use.
Current product information can be found at the TrekStor Website
(www.trekstor.de).
Have you got questions about the operation or the functions of this
product? On the TrekStor website you can find answers to the most
frequently asked questions under "
S
ervice
"
+
"
FAQ
".
i
You can also get quick assistance by contacting our support. If you want to
contact our support, it is best to visit our website, www.trekstor.de, and fill
out the support form that can be found under "
S
ervice
"
+
"
S
upport
". You can of
course also contact us directly by e-mail or telephone (see the back of these
instructions). The more detailed your support request is, the quicker and
better we will be able to help you!
System requirements
For data transfer with a computer
•
Windows® 7/Vista™/XP, Mac® OS X
i
For these operating systems, no drivers are necessary for the operation
of the DataStation in the USB mode. If you use Windows® XP, make sure
that you have installed at least service pack 2.
•
Free USB port (USB 1.1, Hi-Speed USB 2.0 or SuperSpeed USB 3.0)
For data transfer via SuperSpeed USB 3.0
•
Current operating system with installed support for USB 3.0.
i
Please note that the drivers for the USB 3.0 port are not automatically
installed with all operating systems. If you have any questions about
the installation of these drivers, please contact the manufacturer of
your computer or of the used USB 3.0 interface card.
•
Free USB 3.0 port
Important information about the KIT version of this DataStation
This DataStation is also available as a KIT version, i.e. as a version without a
preinstalled 3.5" hard drive. Instructions for the installation of a hard drive
can be found at the back of this manual.
a
The housing of this DataStation may only be opened if you have a KIT
version of this DataStation. If there is a preinstalled hard drive in your
DataStation, opening the housing or breaking the seal stickers over the
screws of the housing may lead to problems in case of a warranty claim.
a
Hard drives can be seriously damaged by electrostatic discharges. It is
necessary that you touch a grounded piece of metal (e.g. a heating or water
pipe) before you take the hard drive out of its ESD bag!
