TREKMATE GAL-002, Руководство пользователя

Страница: 13 / 48

13

For the first time using your product, the analog digital watch (GAL) must
be manually set for its hand-positions, otherwise the hands will display
incorrectly. See Page 41 (Adjusting Hands).

After one minute the digit section of your watch switches to time mode
and the dial section starts moving if no operation run at your product.
(This function is not provided in the digital model (GL)).
Step 3: receive GPS signal, calibrate date and time
(1) Date and time data are received at your product through satellite signal.
Please move to an open outdoor space after setup to do GPS data
detecting.
(2) For best receiving quality please make sure that your product’s antenna is
not blocked and is pointing to the sky above.
(3) Press and hold the D button for 2 seconds in time mode until the GPS
detecting screen displays.
(4) Remain at the same place and wait for detecting. It may take longer time
to complete the detecting if you are moving. You can move around after
the GPS detection is completed.
(5) After the GPS detection is completed, press the D button in time mode to
check the time and coordinates of signal receiving.