Trekkrunner TR001, Инструкция по эксплуатации

Страница: 12 / 14

12
Function Instruction
1. Insert the plug, put the safety key into the control panel, open the power switch, full screen display 1
second after the beep sound to enter standby.
2. In the manual standby mode initially: SPEED display 0.0
；
TIME display 0:00; CAL display 1; DIST
display 0.0; CAL display 0;
3. In the manual standby mode, press the MODE key, you can respectively selected the mode: normal,
preset time or preset distance. If choose count up timer, display
“：”
flash display; and count down,
display the static status.
A. According to the normal, the time and distance are both count up, when the time to 60 minutes, it
’
s
stop.
B. According to the preset time, the original time is 30:00, and the speed can be adjusted from
5:00
--- 99:00,
and the time count down until 0, the machine stop.
C. According to the preset distance, the original distance is 1.00, you can adjust the speed from
Program
Mode
Stop
Start
Speed
-
Speed
+
The Emergency Stop Switch