Step Five:
Repeat this process (Step 4) on the left side of the Desk Top by placing both Support Brackets
(4) into grooves on both ends of the left side of the Desk Top. Affix only one of the brackets with
Assembly Screws (do not yet affix the other bracket with screws). The bottom portion of bracket
should be facing the outside edge of the Desk Top as shown below. Once again the reason for
not affixing the other bracket with screws immediately is to later fit the Upper Leg Assembly
before securing with screws.
Step Six:
-Remove the Support Struts (3) from their pre-molded storage grooves and screw in the four
Strut Clips (SC) into their welled slots (Two per desk top side). The hole in the Strut Clip wells
are not meant for installation, simply position the Strut Clips away from the existing well hole
and secure with an Assembly Screw. The Strut Clips hold the Support Struts within the grooved
channel only in the event you want to fold your TrekDesk for storage or transport at a later date.
