18
Rev 3, 08.08.2016
To set the lower and upper count limit, press the
TARE
key to select the hi/lo limits.
For example; “L=990,” press 990 on the numeric keypad, then
TARE
to switch over to:
H = 1010, press 1010 on the numeric keypad.
Press the
QTY/SET
key to confirm and return to counting mode.
Put 10 pieces of the sample on the platter and press “10” on the numeric keypad. Then
press the
SAMPLE/UNIT
key to store and confirm the sample weight.
Keep adding pieces until it reaches the lowest quantity of “990”. The alarm will sound
when you reach 990.
Keep adding pieces until it reaches the high
est quantity of “1010” or above. The alarm
will sound with a different tone.
Optional auto backlight
Press and hold the
“Mode” key, and then press the “On/Off” (icon) key to turn on the
scale, the display will show A_ON or A_OFF
. Press “Mode” key, the display will
show L
_ON or L_OFF, press the “Zero” key to select L_ON, L_OFF or L_AU (auto).
Press
the “On/Off” key to turn off the scale and then turn it on again to return to
normal operation.
