tarp aSSemBly
partS needed
#49, #50, or #51- 53” x 92” Vinyl Tarp-
(1)
HardWare needed
#80- Tarp Snap Hardware-
(1)
Figure C. - Take the corner of the VINYL TARP and
start placing the snaps on the
PHILLIPS SCREW SNAPS. Fold the VINYL TARP
over the top of the UNIVERSAL TARP
BOARD. Pull tight and place the snaps on the PHIL-
LIPS SCREW SNAPS.
Figure A.- Take one corner of the VINYL TARP and
place it flush in the corner.
Tap the snap with a blunt object, leaving an indention of
the snap in the wood. Repeat
this process until all the snaps have been indented in the
wood on both sides of the loft.
Figure B. - Using the indentions you just made with the
snaps, take the 5/8”
PHILLIPS SCREW SNAPS and drill one into each
indention.
Figure A.
Figure B.
Figure C.
