Treca Interiors CAD 3, Инструкция по сборке и обращению

Страница: 30 / 103

-30-
12/2015 N° 1500 046 / B
SAVOIR VIVRE SAVOIR DORMIR
SETTIG OF THE MEMORY POSITIONS
Your remote control unit has a memory function. It enables you to memorize
up to three positions:
Put the bed into the desired position.
Press the M button 3 times then press one of the memory buttons
(1, 2 or 3). The current bed position will be assigned to the
memory button.
The control unit confirms with a sound signal that the position has
been successfully registered.
New positions can be stored in the memories by repeating the
procedure as many times as required.
RECALLING MEMORY POSITIONS
Stored bed positions may now be recalled using the memory buttons. To do
this, please proceed as follows:
Press and hold one of the memory buttons (1, 2 or 3).
Once the programmed position has been reached the drives will
stop automatically even if you keep the button pressed.
The display shows M1, M2 or M3.
SPECIAL FUNCTIONS
Torch function:
As long as you keep this button pressed, the torch LED lights up.
LED Light module:
Press this button to switch on the light module. If you press this
button a second time, the light module will be switched off again.
Keep pressing the button to activate the dimmer.