5
BEFORE FIRST USE
Check if all accessories are complete and undamaged.
The Trebs coffeemaker comes with a digital led time indicator (24 hours). The time can be adjusted by repeatedly
pressing the Hour setting (20) and Minute setting (16) until the correct time is displayed.
Flus the coffeemaker 2 times before use by filling the water tank to 12 cups with water, insert the power plug and
allow the coffeemaker to operate by pressing the On / Off touch button (18). This will clear out any remaining
debris in the coffeemaker.
OPERATION INSTRUCTIONS
1. Make sure the device is clean, placed on a straight surface and plugged in.
2. Fill the Glass jug (3) with water using the cup indication on the glass jug.
3. Open the water tank lid (7) and pour the needed water from the Glass jug (3) into the water tank (8), while
keeping an eye on the Water tank indicator (9) not to exceed MAX.
4. Fill the removable filter funnel (1) with a fitting coffee filter.
5. Add the necessary amount of ground coffee to the coffee filter.
6. Make sure the removable filter funnel (1) is placed in the correct position within the Coffee maker, the Water
tank lid is closed (7) and the Glass jug (3) is placed correctly between the warming plate (10) and the Drip stop
(2).
7. When ready push the On / Off button (18) to start operation.
8. After operation, the coffee maker will remain active for 40 minutes before the device is automatically turned
off. During this period the warming plate (10) will remain hot.
The coffee maker can also be turned off manually by pressing the On / Off button (18) once.
COFFEE STRENGHT ADJUSTMENT
The Trebs 24100 Coffeemaker is equipped with a special function that adds extra strength to the coffee.
To use this function, follow steps 1 through 6 of the “Operation instructions”.
Before pressing the On / Off button (18) to start operation (step 7), press the strength button (19) on the control
panel. Start operation by pressing the On / Off button (18).
TIMER PROGRAM
The Trebs 24100 coffeemaker is equipped with a delay program function, which allows a pre plan working
schedule. Using the current time, the user can plan a scheduled operation within a 24 hour limit.
1. Follow steps 1 through 6 of the “Operation instruction” description to prepare the coffee maker for delayed
(timer) function.
2. Press the Delay program function (17) and check if the Program indicator (13) is blinking.
3. Set the delayed operation starting time by repeatedly pressing the Hour setting (20) and Minute setting (16)
until the required starting time is displayed
4. Set the starting time by once pressing the Delay program function (17) and check if the Program indicator (13)
is continuously visible.
5. The Delay program function is now active and will automatically begin operation at the set time.
Once operations begins, the On/Off indicator on the control panel will light up.
Note: During operation the Minute setting (16), Hour setting (20) and Delay program function (17) are inactive,
operation must be stopped through the On / Off button (18) before changes can be made.
