-6-
How to use the hand grip
Turn on the power at the bottom side of the hand grip. The power
indicator lights. The switch acts also as a dimmer for the twin
LEDs at the imager head.
Don't buckle the tube. The min. should not go below 15 cm.
How to use the TFT monitor
Slide the power On-Off switch on the right side of the monitor on
position. Now turn the monitor on with the
Standby
button. The
Power LED indicates green. Setup a suitable lighting with the
hand grip. At the monitor you can adjust the brightness and the
contrast, which also depends on the pre-setting of the Twin LEDs.
Twin light LEDs
ON
OFF
ON
OFF
Inspect the inspection camera before use and correct any
problems to reduce the risk of serious injury from electric
chock and other causes and prevent tool damage.
