TROUBLESHOOTING
To Answer Call
To Reject Call
To End Call
To Redial
To Mute
Press
POWER
button during
the incoming call.
Press and hold
POWER
button
for 2 seconds.
Press
POWER
button while on
the phone.
Press
POWER
button twice.
Press
POWER
button twice
during a call.
Problem
Not powering on
Not pairing
Solution
Make sure the headset is fully charged.
Charge for 2 hours, if necessary.
Reset the earbuds:
Press and hold the
POWER
and
buttons simultaneously for 3
seconds, while pairing, until the
LED
flashes blue and red 3 times.
Make sure the headset is not paired with
any other devices, as it can only pair with
two devices at a time.
Press and hold the
POWER
and
buttons simultaneously for 3 seconds,
while pairing, until the
LED
flashes blue
and red 3 times. This will force the headset
to forget previously paired devices.
Repeat the steps for pairing as previously
described.
Alternatively, disconnect the device from
your headset and remove
TREBLAB
xRun
from your device’s pairing list. Try to
pair again.
Содержание xRun
Страница 1: ...xRun WIRELESS EARBUDS USER S MANUAL ...
