2
5
Insert bottom pole into canopy/mainframe pole.
NOTE:
Make sure battery dock on bottom
pole is lined up with ON/OFF switch and USB port on housing. Line up button with hole
and snap into place (Fig. 3).
To close umbrella, twist collar in counter-clockwise direction to bring umbrella back to its
original upright position (Fig. 15). Turn crank in counter-clockwise direction until fully closed.
Properly fold canopy, tie string around canopy and cover umbrella with a protective cover
(not included).
(Fig. 3)
S T E P 2
BW Base Stopper (For BW Classic Base Only)
To avoid the BW Classic Base stem from interfering with the battery, base stopper must be
installed under base.
Turn BW Classic Base on its side. Attach Base Stopper to underside of base by turning
clockwise until tightened (Fig. 4). Turn base back to upright position (Fig. 5).
IMPORTANT:
If you are using a BW Classic Base with your Starlux Collar Tilt, you must attach Base Stopper
to your BW Classic Base. If you are not using a BW Classic Base OR if you have a BW30
Add-on Weight attached to your BW Classic Base, please proceed to Step 3.
(Fig. 4)
(Fig. 5)
To turn umbrella lights on or off, press on/off switch located
on collar housing (Fig. 13).
WARNING:
We do not recommend use of lights while
raining. When lights are not in use, remove battery pack from
umbrella. Store battery pack, along with power supply in dry,
cool area to keep from damaging.
On/Off Switch
(Fig. 13)
To charge electronic devices, remove plug from USB port
(Fig. 14). Insert USB cable into USB port. Reattach plug when
not in use.
Note:
If using USB port and lights, battery life will
reduce to 4 hours.
USB Port
(Fig. 14)
(Fig. 15)