STEP
3
UNPAIRING BLUETOOTH DEVICE
• Only 1 music device can be connected at a time.
• To pair another device, first unpair the current device by disconnecting Bluetooth on the
device, or pressing and holding the Bluetooth power button on top unit for 2 seconds.
You will hear a tone when the current music device unpairs and the Bluetooth light will
begin blinking white again.
Note:
• If you press Bluetooth power button once, the music device will pause. Press once again
and music will resume.
• If you hold Bluetooth power button for 4 seconds, the device will shut off.
STEP
4
TURNING DEVICE OFF
• To turn off EVO, press and hold Bluetooth power button on top unit for 4 seconds. You
will hear a descending tone and Bluetooth Indicator lights will turn off. Both top and
bottom units will be disconnected.
Note:
• EVO will turn off automatically when Bluetooth is in pairing mode, or inactive for more
than 15 minutes.
• When your music device is disconnected, you will hear a prompt sound from EVO.
STEP
5
LED LIGHTS
• To turn on and turn off LED lights, press the LED light power button located on top and
bottom units.
4
3
Top Unit
LED Light
Power Button
Bottom Unit
LED Light
Power Button
STEP
6
ATTACHING EVO TO UMBRELLA
• The top unit of the EVO can be attached to umbrella center poles up to 2” and cantilever
umbrella light adapters.
• Open EVO by holding the device firmly with one hand and then press “unlock” button
with the other hand to release the clamp lock.
• Open up the EVO top unit, remove from Bottom unit, and clasp around the mid pole or
light adapter. Snap to close.
Note:
• When reattaching top unit to
bottom, make sure the buttons
on the top and bottom unit
align. Note the grooves on top
unit only line up one way.
• Doing so will cause damage to
electrical components.
