S T E P 1
Assemble AG28 Base
Select area to set base and place in desired location.
Remove base lid from base shell and set aside (Fig. 1). Insert the base stem into the base
shell (Fig. 2). Turn collar base stem in a clockwise motion to engage threading. Fill
base shell with dry playground or all-purpose sand (not included) (Fig. 3).
NOTE:
Base
weight will be 250 lbs. after sand is added. Remove the base stem carefully and avoid
allowing sand into the center of the base shell (Fig. 4).
IMPORTANT:
Do not allow sand to spill
into the center of the base (Fig. 4) as it will interfere with collar base stem installation. Place base
lid back onto base shell.
8
3
CAUTION:
Fully assembled, the AG28 umbrella weighs
over 300 lbs.
Moving the
umbrella fully assembled will increase the risk of damage to your umbrella and can
cause serious injury.
We recommend a two-person team to assemble the umbrella.
(Fig. 1)
(Fig. 3)
Avoid allowing sand
into the center of the
base shell.
!
(Fig. 2)
(Fig. 4)
(Fig. 18)
(Fig. 19)
AG28 Features
To Attach an Umbrella Light:
Loosen the light adapter built into the umbrella runner by turning counter-clockwise
(Fig. 18). After loosening, pull down light adapter post (Fig. 19) to attach the
umbrella light (sold separately).
To Remove Umbrella Light and Close Adapter:
Remove umbrella light, and gently push up the light adapter post back into umbrella runner
and tighten turning clockwise (Fig. 18).
