5
STEP
5
ROTATING UMBRELLA
Loosen the base pole clamp by turning the clamp counter-clockwise. Rotate the umbrella to
the desired position. Turn the clamp in a clockwise direction to secure into place (Fig. 16).
6
STEP
4
TILTING UMBRELLA
IMPORTANT: PRIOR TO USING TILT FEATURE.
To avoid personal injury or damage to the umbrella, make sure the area behind you is clear
and free from any furniture or structure.
Position yourself behind umbrella. Pull the operating handle from the support strut (Fig. 12).
Pull the steering rod further away from the support strut (to a 45° angle) until the steering
rod is in the
marked range
(Fig. 13). While still in the marked range, rotate the steering rod
to the left or right (Fig. 14), to the angle you wish to tilt.
If you wish to rotate the canopy 15°
clockwise, then rotate the steering rod 15° counter-clockwise.
NOTE:
The canopy will not tilt during this motion. Re-engage the tilt gear by pushing
forward slightly (out of the marked range). While still engaged, pull (rotate) the steering rod
back to the center position. The canopy will now tilt with the direction of the steering rod.
Push the steering rod straight forward until the crank case locks into place on the support
strut (Fig. 15). Your canopy should now be locked into its tilted position. To return canopy
to its horizontal position, pull the operating handle slightly away from the support strut, but
NOT into the marked range. Rotate the canopy back to horizontal position, then pull the
steering rod into the marked (release) range; which will allow the steering rod to move freely
back to the center position.
Marked
Range
(Fig. 12)
(Fig. 13)
(Fig. 14)
(Fig. 15)
Base Pole Clamp
(Fig. 17)
(Fig. 18)
STEP
6
LIGHT ADAPTER FEATURE
To ATTACH Umbrella Light:
(sold separately)
Loosen the light adapter built into the umbrella runner by turning counter-clockwise
(Fig. 17). After loosening, pull down light adapter post (Fig. 18) to attach the umbrella light
(sold separately)
.
To REMOVE Light and CLOSE adapter:
Remove umbrella light and gently push up the light adapter post back into umbrella runner
and tighten turning clockwise (Fig. 17).
NOTE:
It is not necessary to remove light to close
umbrella.
(Fig. 16)
