6
USING HEADPHONES/EAR BUDS
You can connect a pair of stereo headphones (not supplied) to the
detector so you can listen to it privately. Using headphones also saves
battery power and makes it easier to identify subtle changes in the
sounds you hear, for better detection results.
To connect headphones to the detector, insert the headphones’ 3.5mm
plug into the EAR jack on the control panel.
Note: The detector’s internal speaker disconnects when you connect
headphones.
LISTENING SAFELY
To protect your hearing, follow these guidelines when you use
headphones.
Set the volume to the lowest setting before you begin listening.
After you begin listening, adjust the volume to a comfortable
level.
Do not listen at extremely high volume levels. Extended high
volume listening can lead to permanent hearing loss.
Once you set the volume, do not increase it. Over time, your ears
adapt to the volume level, so a volume level that does not cause
discomfort might still damage your hearing.
Traffic Safety
Do not wear headphones while operating your detector near high-traffic
areas. Even though some headphones are designed to let you hear
some outside sounds when listening at normal volume levels, they still
can present a traffic hazard.
