www.TreasureCoastStreamingTV.com
page 2
Setting Up Your mx3 Box
Your MX3 box comes pre-installed with everything you need.
To set up, simply connect the power adapter to the wall and to the Power Connector.
If you are using Ethernet (wired internet) connect the cable to the Ethernet Port. If you’re using Wireless, you don’t need
to do this.
Depending on your TV you can use an HDMI cable or an RCA cable to connect to your TV. If you have an HDMI port (see
Figure 1), you should use it as the quality of the picture is much much higher.
Figure 1
If you have HDMI ports, connect the HDMI cable (Figure 2) to the HDMI port on your MX3 and the TV.
Figure 2
