Traynor YS1062, Руководство пользователя

Страница: 3 / 16

1
Low-Mid Hi-Mid Treble Bass MASTER
0
4 6
1
3
7
9
2 8
5
10
Tuner
Limiter
Line
Out
Pre-EQ
Post-EQ
Inputs
0 -9
Mute
Gain
400 Hz
Scoop
-15
0
+15 0
5
10
Phones On
Power
Clip
Out In
0
5
10 -15
0
+15 -15
0
+15 -15
0
+15
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • TORONTO, CANADA
MODEL TYPE: YS1071
A-Z1033R /1v0
GND
Lift
1+1–
Send
EFX
Rtn
Monitor
Gain
Monitor
In
Line Out
10 0
SPEAKER OUTS
Min 4 ohms
SPEAKON™
Pin Config
Passive Active
DynaBass
300
DynaBass
300
DynaBass 300 Bass Guitar Amplifier
DynaBass 300/300T
Thank you for choosing the DynaBass 300. You will discover that this bass amplifier has
the ability to sound “right” with a minimum amount of knob twirling and delivers great tone
making it perfect for your any performance. Best of all its lightweight, compact design will
make setups/teardowns a great deal easier.
When you need the extras, they’re all here:
• Dual
Inputs
are provided for standard Passive pickups (
0 dB
) and extra-hot or
Active pickups ( -9 dB ).
• An input Clip LED illuminates if the input signal is set too high on your bass.
•
Gain
and
Master
controls let you dial-in the perfect amount of clarity, warmth or even
overdrive at the right level.
• The Scoop control lets you tailor your sound precisely and uniquely by emphasizing
lows and highs while reducing the midrange.
• Active
Bass, Low-Mid, Hi-Mid and Treble
tone controls provide up to 15dB of
cut or boost
• A separate selectable
Limiter
helps prevent output-stage clipping distortion when
clarity is what you seek.
• A separate Tuner Out jack lets you keep your tuner connected without affecting your signal
quality. This also makes tuning convenient since it’s always available for quick reference and
adjustments. Using the Mute button ensures that the audience doesn’t hear you tuning.
• The balanced XLR
Line Out
is selectable via front-panel pushbutton between
Pre-EQ
(dry) or Post-EQ (wet).
• A Speakon™ and two ¼-inch Speaker Outputs are provided for your convenience. All
jacks are in parallel and the overall minimum load is 4 ohms.
• The
Phones
jack permits connecting headphones for silent practicing, or monitoring
yourself in the studio
• A unique
Monitor In
jack and
Monitor Gain
control on the back panel allow you to mix
in a main or monitor line feed from the mixer. The line feed sent through the Monitor In
jack does not get sent to the Line Output (DynaBass 300 and 300T Combos only)
• Balanced ¼-inch
Efx Send
and
Return
jacks
• A full-range speaker system with acoustically matched and precisely crossed-over low
and high-frequency drivers (DynaBass 300 and 300T Combos only)
• A
Tweeter Defeat/Active
switch on the back of the cabinet allows you to pre-set the
DynaBass 300 for higher note definition or a softer vintage sound (DynaBass 300 and
300T Combos only)
Please take a little time to read the following instructions; then plug in, switch on, and unleash
your musical creativity!