4
DG30D2 - 30w / 12-inch / Digital DSP and Digital Reverb
The Traynor DynaGain DG30D2 delivers a
full 30-watts through its high quality 12-inch
Celestion™ speaker, making it perfect for
rehearsals with the band and personal practice.
The two-channel design allows switching between
a pristine clean tone and a searing lead tone; the
optional AFS2 footswitch allows you to switch
between channels on the fly or for remote effects
defeat. You can also use the Channel Selector
switch on the main panel. The Traynor DG30D2’s
24-bit digital multi-effects processor offers chorus,
flange, vibrato and four special effects. The
Traynor DG30D2 has RCA line inputs for quick
connection of a CD, MP3 Player or other audio
devices, allowing any audio source to be mixed
with the guitar for play-along practice. The 1/4-inch
headphone jack also makes the Traynor DynaGain
DG30D2 an ideal amplifier for practicing privately.
Features
• 30-Watts
• 12-inch Celestion™ Speaker
• Footswitchable* Clean and Overdrive Channels
• Bass / Mid / Treble Tone Controls
• On-board 24-bit Digital Effects Processor
(Chorus, Flange Vibrato and Special Effects)
with footswitchable defeat*
• 24-bit Digital Reverb with footswitchable defeat*
• Auxiliary Line Inputs for a CD, MP3 Player or
other audio devices.
• 1/4-inch TRS Headphone Jack that also
doubles as a Line Out.
* Using the optional AFS2 footswitch
1. Hi and Lo Input Jacks
Connect your guitar using a shielded ¼-inch
guitar cable to this jack. For a bright, high
gain sound, use the jack labelled Hi. For a
darker, lower gain sound use the jack labelled
Lo. If you use both jacks simultaneously, both
jacks will be high gain.
2. Gain
The Gain control varies the amount of overdrive
for channel 1. Channel 1 uses the Gain control
to allow more flexibility when trying to achieve
the perfect amount of distortion. For greater
distortion turn the dial clockwise, for less, dial the
control counter-clockwise.
3. Channel 1 Volume
This controls the loudness of channel 1.
4. Channel Select Switch
This switch allows toggling between channels
1 and 2.
5. Channel 2 Volume
This controls the level of channel 2. A bluesy
tone, with a bit of crunch, can be achieved by
increasing this control’s setting.
6. Tone Controls
Bass/Middle/Treble Use these controls to
shape your tone.
7. Master Volume
The Master control adjusts the overall loudness
of the DG amplifier.
8. Digital Effects Section:
a. Reverb
The Reverb control sets the amount of
reverberation mixed with the guitar signal.
b. Effects Select
This sixteen-position selector let’s you
choose from a variety of useful and
interesting effects. The effect types are
labelled on the chassis and include a variety
of echos, choruses, flangers, vibrato effects,
and a selection of four special effects.
c. Effects Level
The Effect Level control adjusts the
amount of the selected effect, or the
parameters of the effect
.
9. CD Input
This input can be used to connect a CD player,
MP3 Player or other audio device enabling you to
jam along with your favourite tunes.
10. Power Switch
This switch turns your amplifier on or off. The
green LED next to the switch illuminates when
amplifier power is on.
11. Footswitch
An optional two-button latching-type footswitch
can be used for channel select and effects defeat.
(Yorkville Sound Part AFS-2 recommended).
