8 • TRAXXAS TRX-4
Option Part
8249 Slipper Eliminator
ACCESSORY
2.5x8mm CS (3)
Locknut
4x8 Metal Washer
Spring Washer
Slipper Plate
Slipper Friction Material
Transfer Case Cover
45T Spur Gear
TRANSMISSION BAG
TRANSMISSION BAG
A. TRANSMISSION ASSEMBLY
2.5x8mm CS
Remove friction
material backing and
apply to spur gear
To tighten the slipper nut, insert the 2.0mm hex wrench into the hole
in the end of the input shaft. This locks the shaft for adjustments.
Turn the adjustment nut until all four spring washers are flat; then,
tighten the nut an additional 1/16 turn (or until the slipper clutch
does not allow the spur gear to slip during normal operation).
Once assembled, turn input shaft.
The gears should spin freely with no binding.
2.0mm
Hex Wrench
4-Way
Wrench
Spring washer
orientation
A7. Assemble transfer case
A8. Install slipper clutch and spur gear
7
3
TRX-4 Assembly Manual.indd 8
12/28/17 5:30 PM
