background image

SLASH • 5

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate 
and maintain your model.

For more information on 
batteries, see Use the Right 
Batteries on page 11.

Recommended Equipment

These items are not required 
for the operation of your 
model, but are a good idea to 
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire 

Glue, Part #6468 (CA glue)

• Hobby knife
• Side cutters and/or needle 

nose pliers

• Phillips screwdriver 
• Soldering iron 

 

Supplied Tools and Equipment

U-joint wrench

Pre-load spacers and 

shock pistons

Body clips and body washers

4-way wrench

2.5mm “L”  wrench

2.0mm “L”  wrench

1.5mm “L”  wrench

Turnbuckle wrench

Foam battery pad

Antenna nut wrench

Optional gears

7-cell NiMH battery pack*

6- or 7-cell NiMH battery pack 

or 2S LiPo battery pack, with 

Traxxas High-Current Connector

NiMH battery charger*

Battery Charger

4 AA alkaline batteries

Required Equipment 

Included 

with 58034

Required 

for 58024

*Battery and charger style are subject to change and may vary from images. Not included with 58024.

Содержание Splash 58024
























Отзывы: