background image

14 • TRX-6

INSTALLING THE BATTERY PACK

WARNING:

 Do not pinch the battery wires or connector.

Install the battery pack with the battery wires facing the rear of the 
model. Swing the battery hold down towards the chassis and snap 
(lock) the end into the front hold-down retainer. 

Note:

 The battery hold down can be rotated on its pivot to 

accommodate different height battery packs.

CONNECTING THE  

LED LIGHTS

Before installing the vehicle 
body, plug the black wire from 
the distribution block into the 
LED lighting module to power 
the LED lights. The lights will 
turn on when the speed control 
is turned on.

INSTALLING THE BODY

To secure the TRX-6 

Mercedes-Benz® G 63®

 AMG body to the frame to 

prevent body shake, align the body with the rear bumper and rock 
sliders as shown below. 

THE TRAXXAS HIGH-CURRENT 

CONNECTOR

Your model is equipped with the Traxxas High-

Current Connector. Standard connectors restrict 
current flow and are not capable of delivering 
the power needed to maximize the output of the XL-5 HV. The Traxxas 
connector’s gold-plated terminals with large contact surfaces ensure 
positive current flow with the least amount of resistance. Secure, long-
lasting, and easy to grip, the Traxxas connector is engineered to extract 
all the power your battery has to give.

TRAXXAS TQ

i

 RADIO SYSTEM

Battery iD

Traxxas recommended 
battery packs are equipped 
with Traxxas Battery iD. This 
exclusive feature allows 
Traxxas battery chargers (sold 
separately) to automatically 
recognize connected battery 
packs and optimize the 
charge settings for the 
battery. This eliminates 
the need to worry over 
charger settings and menus 
for the easiest and safest 
charging solution possible. 
Visit Traxxas.com to learn 
more about this feature and 
available Traxxas iD chargers 
and batteries.

4

4

1

2

Содержание Scale and Trail TRX 6 88096-4







































Отзывы: