www.TRAXXAS.com
Traxxas, 1100 Klein Road, Plano, TX 75074, Phone: 972-265-8000, Fax: 972-265-8011, e-mail: [email protected]
3937
4x12 BCS
5411
5411
5413
5411
5413
5411
5412
5446
5446G
3936
4x10 BCS
3937
4x12 BCS
5282
3x12 BCS
2579
3x15 BCS
2579
3x15 BCS
2581
3x25 BCS
2581
3x25 BCS
5314
5282
3x12 BCS
If you have questions or need technical assistance, call Traxxas at
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)
Wing Mount Assembly
C. Wing Adjustment
The wing mount can be adjusted for both height and deflection angle.
1. The two top holes set the wing height. Using the upper hole will lower
the level of the wing by approximately 3/8 inches.
2. The lower three holes adjust the angle of wing incidence. By using the
rear hole, wing down force will be maximized by adding negative wing
deflection. For less deflection, the front holes can be used to fine tune
the amount of down force needed for your track conditions.
5411
Wing mount, Revo (complete minus wing,
part #5412 or other) ............................................................. 10.00
5412
Wing, Revo (white)/ decal sheet...................................... 14.00
5413
Wing mount, center / wing washers (for Revo
) ..........
5.00
5446
Wing, Revo (black)/ decal sheet ...................................... 14.00
5446G
Wing, Revo (Exo-Carbon finish)/ decal sheet ............. 20.00
071017_KC1098_RevoWingMountINST.indd 2
10/17/07 2:21:54 PM
