1. Open the EZ-Peak Live App on your mobile device; plug the charger into an AC wall
outlet and connect the battery
2. Use the EZ-Peak Live App to select
the battery type, charging mode,
battery capacity, and charge rate.
Once the app sends these charge
settings to the charger, the Start button
will blink green.
Note:
If the LiPo battery type is selected,
a balance plug connection is required
by the charger and the EZ-Peak Live
App before displaying the LiPo charging
options. Once the charger detects a
balance plug connection, the EZ-Peak
Live App will display the charging
options and you can select your
preferred charging mode:
Balance
,
Fast
,
or
Storage Charge
. If the LiPo and NiMH
LEDs alternately blink, then the balance
connector is either disconnected or
damaged.
Do not attempt to charge
this LiPo battery.
Charging Traxxas Batteries without iD using the EZ-Peak Live App
When a battery is connected for charging
that does not have Traxxas Battery iD, the red
charge progress LEDs will sweep in a scanning
motion and the charger buttons will be
disabled. The EZ-Peak Live App will indicate
that a battery without Traxxas iD is connected
to the charger. The app must be used to select
the charge settings.
WARNING:
DO NOT
attempt to charge LiPo batteries with missing or damaged balance connectors. If
you fail to plug in the balance connector, or attempt to charge a LiPo battery with a damaged or missing
balance connector, you create the risk of accidentally selecting to charge a LiPo battery in NiMH mode,
resulting in fire and possible injury to yourself and others. Always make sure to select the battery type that
matches the connected battery.
If you do not understand what this warning means, contact Traxxas for
more information.
1. Open the EZ-Peak Live App on your mobile device; plug the
charger into an AC wall outlet and connect the battery
2. Verify the charge settings
Charging Traxxas iD NiMH or LiPo
Batteries using the EZ-Peak Live App
Battery type displayed in the app must match the battery type
shown on the battery. Use the app to select the charge rate and
to select
Balance
,
Fast
, or
Storage Charge
for LiPo batteries.
The charger will recognize the iD battery and the charge
settings will be displayed in the EZ-Peak Live App.
3. Charging
Press and hold the Start button
for 2 seconds. The charger will
play a tone, indicating that
charging has started. Press once
to stop. The charger will play a
tone, indicating that charging
has been canceled. The charge
progress LEDs will light as the
battery charges.
4. Charge cycle complete
The charger will play a complete tone, followed by a beep to indicate
charging is complete.
App Live LED
Charging
(flashing)
Charge Cycle Progress
Cycle Complete
(solid)
Charge Mode
(the default is
Balance)
LiPo Only
Battery Type
Start
