background image

4 • TRAXXAS

This model is not intended 
for use by children under 
14 years of age without the 
supervision of a responsible 
and knowledgeable adult.

All instructions and 
precautions outlined in this 
manual should be strictly 
followed to ensure safe 
operation of your model.

No previous experience 
with radio controlled 
models is required.  
Models require a minimum 
of setup, maintenance, or 
support equipment. 

• 

Use Stock Connectors:

 If you decide to change the battery or motor connectors, 

only change one battery or motor connector at a time. This will prevent 
accidentally mis-wiring the speed control. If the XL-5 is not wired exactly as 
shown in the diagram, it can be damaged! Please note that modified speed 
controls can be subject to a rewiring fee when returned for service.

• 

No Reverse Voltage:

 The speed control is not protected against  

reverse polarity voltage. When changing the battery and/or motor, be sure to 
install the same type of connectors to avoid reverse polarity damage to the speed 
control. Removing the battery connectors on the speed control or using the 
same-gender connectors on the speed control will void the product’s warranty.

• 

Motor Capacitors Required: 

Three 0.1µF (50V) ceramic capacitors should be 

properly installed on every motor to prevent radio interference. Capacitors have 
been provided with the XL-5.

• 

No Schottky Diodes:

 External schottky diodes are not compatible with reversing 

speed controls. Using a schottky diode with the XL-5 will damage the ESC and 
void the 30-day warranty.

Batteries and Battery Charging

The XL-5 speed control uses rechargeable batteries that must be handled with 

care for safety and long battery life. Make sure to read and follow all instructions 
and precautions that were provided with your battery packs and your charger. It is 
your responsibility to charge and care for your battery packs properly. In addition 
to your battery and charger instructions, here are some more tips to keep in mind.

• Never leave batteries to charge unattended.
• Remove the batteries from the model while charging.
• Allow the battery packs to cool off between runs (before charging).
• Always unplug the battery from the electronic speed control when the model is 

not in use and when it is being stored or transported.

• Do not use battery packs that have been damaged in any way.
• Do not use battery packs that have damaged wiring, exposed wiring, or a 

damaged connector.

• Children should have responsible adult supervision when charging and handling 

batteries.

• Use the supplied charger to charge the included battery. See “Charging the 

Battery Pack” on page 12.

• Do not charge batteries inside of an automobile. Do not charge batteries while 

driving in an automobile. The charger is equipped with a long cord intended 
to allow the battery to be charged outside of an automobile when using the 
automobile’s auxiliary power socket. If the cord will not reach outside of the 
automobile, find another power source.

• Never charge batteries on wood, cloth, carpet or on any other flammable 

material.

• Do not operate the charger in a cluttered space, or place objects on top of the 

charger or battery.

• If a battery gets hot to the touch during the charging process (temperature 

greater than 140°F / 60°C), disconnect the battery from the charger and 
discontinue charging immediately.

• Always store battery packs safely out of the reach of children and pets.
• Do not short-circuit the battery pack. This may cause burns and severe damage to 

the battery pack and create the risk of fire.

• Do not burn or puncture the batteries. Toxic materials could be released. If eye or 

skin contact occurs, flush with water.

• Do not expose the charger to water or moisture.
• Do not disassemble the charger.
• Store the battery pack in a dry location, away from heat sources and direct 

sunlight.

• Nickel-Metal Hydride (NiMH) batteries must be recycled or disposed of properly.

Recycling Your Traxxas Power Cell NiMH Battery

Traxxas strongly encourages you to recycle your Power Cell NiMH battery when it 
has reached the end of its useful life. 

Do not throw your battery in the trash.

 All 

Power Cell NiMH battery packs display the RBRC (Rechargeable Battery Recycling 
Corporation) icon, indicating they are recyclable. To find a recycling center near 
you, ask your local hobby dealer or visit www.call2recycle.org.

LiPo Batteries

Lithium Polymer (LiPo) batteries are becoming popular for use in R/C models due 

to their compact size, high energy density, and high-current output; however, 
these types of batteries require special care and handling procedures for long life 
and safe operation. 

WARNING: LiPo batteries are intended only for advanced 

users that are educated on the risks associated with LiPo battery use. Traxxas 
does not recommend that anyone under the age of 14 use or handle LiPo 
battery packs without the supervision of a knowledgeable and responsible 
adult.

The XL-5 speed control is able to use LiPo batteries with nominal voltage not to 

exceed 7.4 volts (2S packs). LiPo batteries have a minimum safe discharge voltage 
threshold that should not be exceeded. The XL-5 is equipped with built-in Low-
Voltage Detection that alerts the driver when LiPo batteries have reached their 
minimum voltage (discharge) threshold. 

It is the driver’s responsibility to stop 

immediately to prevent the battery pack from being discharged below its safe 
minimum threshold.

Low-Voltage Detection on the speed control is just one part of a comprehensive 

plan for safe LiPo battery use. 

It is critical for you, the user, to follow all 

other instructions supplied by the battery manufacturer and the charger 
manufacturer for proper charging, use, and storage of LiPo batteries. Make sure 
you understand how to use your LiPo batteries. 

Be aware that Traxxas shall not 

be liable for any special, indirect, incidental, or consequential damages arising out 
of the installation and/or use of LiPo batteries in Traxxas products.

DO NOT ATTEMPT TO CHARGE LIPO BATTERIES OR ANY OTHER TYPE OF BATTERY 

WITH THE INCLUDED TRAXXAS CHARGER.

If you have questions about LiPo battery usage, please consult with your local 
hobby dealer or contact the battery manufacturer.

SAFETY PRECAUTIONS

Содержание Craniac 36094-1



























Отзывы: