background image

4 • TRAXXAS

This model is not intended 
for use by children under 
14 years of age without the 
supervision of a responsible 
and knowledgeable adult.

All instructions and 
precautions outlined in this 
manual should be strictly 
followed to ensure safe 
operation of your model.

All of us at Traxxas want you to safely enjoy your new model. Operate 
your model sensibly and with care, and it will be exciting, safe, and 
fun for you and those around you. Failure to operate your model in 
a safe and responsible manner may result in property damage and 
serious injury. The precautions outlined in this manual should be strictly 
followed to help ensure safe operation. You alone must see that the 
instructions are followed and the precautions are adhered to. 

IMPORTANT POINTS TO REMEMBER

• Your model is not intended for use on public roads or congested  

areas where its operation can conflict with or disrupt pedestrian or 
vehicular traffic.

• Never, under any circumstances, operate the model in crowds of 

people. Your model is very fast and could cause injury if allowed to 
collide with anyone.

• Because your model is controlled by radio, it is subject to radio 

interference from many sources that are beyond your control. Since 
radio interference can cause momentary losses of radio control, always 
allow a safety margin in all directions around the model in order to 
prevent collisions. 

• The motor, battery, and speed control can become hot during use. Be 

careful to avoid getting burned. 

• Don’t operate your model at night, or anytime your line of sight to the 

model may be obstructed or impaired in any way.

• 

Most importantly, use good common sense at all times.

BATTERIES AND BATTERY CHARGING

The speed control uses rechargeable batteries that must be handled 

with care for safety and long battery life. Make sure to read and follow 
all instructions and precautions that were provided with your battery 
packs and your charger. It is your responsibility to charge and care for 
your battery packs properly. In addition to your battery and charger 
instructions, here are some more tips to keep in mind.

• Never leave batteries to charge unattended.
• Remove the batteries from the model while charging.
• Allow the battery packs to cool off between runs (before charging).
• Always unplug the battery from the electronic speed control when the 

model is not in use and when it is being stored or transported.

• Do not use battery packs that have been damaged in any way.
• Do not use battery packs that have damaged wiring, exposed wiring, 

or a damaged connector.

• Children should have responsible adult supervision when charging and 

handling batteries.

LiPo Batteries

WARNING:

 Lithium Polymer (LiPo) batteries require special care and 

handling procedures for long life and safe operation. LiPo batteries 
are intended only for advanced users that are educated on the risks 
associated with LiPo battery use. 

Traxxas does not recommend that 

anyone under the age of 14 use or handle LiPo battery packs without 
the supervision of a knowledgeable and responsible adult.

LiPo batteries have a minimum safe discharge voltage threshold that 

should not be exceeded. The ESC is equipped with built-in Low-Voltage 
Detection that alerts the driver when LiPo batteries have reached their 
minimum voltage (discharge) threshold. 

It is the driver’s responsibility 

to stop immediately to prevent the battery pack from being 
discharged below its safe minimum threshold.

Low-Voltage Detection on the speed control is just one part of a 

comprehensive plan for safe LiPo battery use. 

It is critical for you, 

the user, to follow all other instructions supplied by the battery 
manufacturer and the charger manufacturer for proper charging, use, 
and storage of LiPo batteries. Make sure you understand how to use 
your LiPo batteries. 

Be aware that Traxxas shall not be liable for any 

special, indirect, incidental, or consequential damages arising out of the 
installation and/or use of LiPo batteries in Traxxas products.

If you have questions about LiPo battery usage, please consult with your 

local hobby dealer or contact the battery and/or charger manufacturer.

SAFETY PRECAUTIONS

When Operated with NiMH Batteries

  

No previous experience with radio controlled 
models is required. Models require a minimum of 
setup, maintenance, or support equipment.

(Battery not included)

When Operated with LiPo Batteries

  

Expert Drivers Only! This product is capable of 
extreme speed and acceleration! Experience 
with LiPo batteries and the additional charging, 
storage, and operation requirements of LiPo 
batteries is required. Ages 14 and under should 
not use LiPo batteries without adult supervision. 

(Battery not included)

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Choose the Model That is Right For You.

For individual Models

No previous experience with radio controlled models is required.

Models require a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. These 

models are capable of high speeds, requiring experienced driving control. 

Models require detailed setup, and/or maintenance procedures with required 

support equipment. 
Previous experience with radio controlled models is mandatory. 

These models are capable of very high speeds and require an even higher 

level of skilled driving control. Models require detailed setup, and/or mainte-

nance procedures with required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 

for expert drivers only. Experience with nitro-powered radio controlled 

models is required!

Previous experience with radio controlled models is recommended.

Models require a higher level of setup, maintenance, or support equipment. 

No previous experience with radio controlled models is required.

Model requires a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. This model is 

capable of high speeds, requiring experienced driving control. Model requires 

detailed setup, and/or maintenance procedures with required support 

equipment. 

Previous experience with radio controlled models is mandatory. This model is 

capable of very high speeds and requires an even higher level of skilled driving 

control. Model requires detailed setup, and/or maintenance procedures with 

required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 

for expert drivers only. Experience with nitro-powered radio controlled 

models is required!

 Previous experience with radio controlled models is recommended.

Model requires a higher level of setup, maintenance, or support equipment.

BELOW TEXT HAS BEEN UPDATED on 3-14-07
Kent wants maintenance text to be at the END of the paragraph.-- KB

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Choose the Model That is Right For You.

For individual Models

No previous experience with radio controlled models is required.

Models require a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. These 

models are capable of high speeds, requiring experienced driving control. 

Models require detailed setup, and/or maintenance procedures with required 

support equipment. 
Previous experience with radio controlled models is mandatory. 

These models are capable of very high speeds and require an even higher 

level of skilled driving control. Models require detailed setup, and/or mainte-

nance procedures with required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 

for expert drivers only. Experience with nitro-powered radio controlled 

models is required!

Previous experience with radio controlled models is recommended.

Models require a higher level of setup, maintenance, or support equipment. 

No previous experience with radio controlled models is required.

Model requires a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. This model is 

capable of high speeds, requiring experienced driving control. Model requires 

detailed setup, and/or maintenance procedures with required support 

equipment. 

Previous experience with radio controlled models is mandatory. This model is 

capable of very high speeds and requires an even higher level of skilled driving 

control. Model requires detailed setup, and/or maintenance procedures with 

required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 

for expert drivers only. Experience with nitro-powered radio controlled 

models is required!

 Previous experience with radio controlled models is recommended.

Model requires a higher level of setup, maintenance, or support equipment.

BELOW TEXT HAS BEEN UPDATED on 3-14-07
Kent wants maintenance text to be at the END of the paragraph.-- KB

1

Important! 

Always Use Low-Voltage Detection With LiPo Batteries

From the factory, the model’s speed control has been set up 

for LiPo batteries, with Low-Voltage Detection enabled. This system 
is designed to prevent accidental over-discharging of LiPo batteries. 
If you choose to run NiMH batteries in your model, the Low-Voltage 
Detection may be switched off to ensure maximum run time with NiMH 
batteries. 

Caution: Low-Voltage Detection MUST be enabled if you 

use LiPo batteries in your model. 

Before using LiPo batteries in your 

model, make certain you read, understand, and follow all warnings 
and precautions included in this manual.

Содержание 6907





























Отзывы: