background image

 XO-1

INTRODUCTION

Thank you for purchasing the XO-1.

 This model is capable of 

extreme performance and high speeds unsurpassed by any other 
R/C vehicle, with the durability and ease of use that are hallmarks 
of Traxxas’ Ready-To-Race

®

 models. The included TQi 2.4GHz 

transmitter with the Traxxas Link Wireless Module is ready to accept 
your Apple iPhone®, iPod touch®, iPad®, or iPad mini™ and the 
Traxxas Link™ application for a new level of tuning sophistication 
and convenience.

This manual contains the instructions you will need to operate 
and maintain your model so that you can enjoy it for years to 
come.  We know you’re excited about getting your new model 
on the road, but it’s very important that you take some time to 
read through the Owner’s Manual. This manual contains all the 
necessary setup and operating procedures that will allow you to 
unlock the performance potential that Traxxas engineers designed 
into your model. 

Also be sure to read and follow ALL precautions 

and warnings in this manual, on all documents enclosed with 
your model, and on all labels or tags attached to your model 
or model’s accessories. They are there to educate you on how 
to operate your model safely, and also get maximum life and 
performance from your model.  

Even if you are an experienced 

R/C enthusiast, it’s important to read and follow the procedures in 
this manual and all accompanying documents.  Thank you again for 
going with Traxxas. We work hard every day to assure you receive 
the highest level of customer satisfaction possible. We truly want 
you to enjoy your new model!
 

3

 SAFETY 

 

PRECAUTIONS

6

  BEFORE YOU  

PROCEED

7

  TOOLS, SUPPLIES, 

AND REQUIRED 
EQUIPMENT

8

  ANATOMY OF THE XO-1

9

  QUICK START:  

GETTING UP TO SPEED

10

  TRAXXAS TQ

RADIO SYSTEM

18

 ADJUSTING THE 

ELECTRONIC SPEED 
CONTROL

19

  DRIVING YOUR MODEL

20

 BASIC TUNING 

ADJUSTMENTS

23

 MAINTAINING  

YOUR MODEL

25

 ADVANCED TUNING 

ADJUSTMENTS

28

 DRIVING 100MPH

31

 TQ

i

 ADVANCED  

TUNING GUIDE

TABLE OF CONTENTS

Entire contents ©2014 Traxxas. Traxxas, Ready-To-Race, Ready-To-Win, XO-1 and ProGraphix are trademarks or registered 
trademarks of Traxxas. Other brand names and marks are the property of their respective holders and are used only for purposes 
of identification. No part of this manual may be reproduced or distributed in print or electronic media without the express written 
permission of Traxxas. Specifications are subject to change without notice.

Traxxas
6200 Traxxas Way
McKinney, Texas 75070
Phone: 972-549-3000
Toll-free: 1-888-TRAXXAS

Internet:
Traxxas.com
E-mail: 
[email protected]

Traxxas Support

Traxxas support is with you every step of the 
way. Refer to the next page to find out how to 
contact us and what your support options are.

Quick Start

This manual is designed with a Quick 
Start path that provides an overview of 
the necessary procedures to get your 
model up and running. The Quick Start 
is NOT a substitute for reading the entire manual. The Quick 
Start is merely intended to direct you to sections of the manual 
to more quickly familiarize yourself with the basics of this 
models operation. Do not run the model without thoroughly 
reading all of the instructions, warnings, and precautions 
supplied with your model. Pay particular attention to the 
warnings in the beginning and throughout the remainder of 
this manual. The Quick Start guide is located on page 9.

Содержание 64077





































Отзывы: