7. Install the transmission back into the chassis
(use steps 1-5 as a guide).
Reinstallation
notes:
1. Make sure to reconnect the front
half shafts together on 4WD models. 2.
Remember to the reconnect the throttle
servo horn perpendicular to the servo (as
it was before), and then secure it with the
servo horn screw. Refer to your owners’
manual for proper servo linkage set-up.
Adjusting the slipper clutch
The slipper clutch can be adjusted to suit many different surface
conditions and driving styles.
Base slipper setting
Tighten the slipper to where you can just slightly turn the
spur gear by hand while locking the slipper shaft. This a good
starting point to protect the drivetrain from shock loads. Make
further adjustments to suit your driving conditions. Do not make
adjustments to the slipper clutch any larger than 1/8 turn at a time.
Adjust slipper to…
• Limit wheel spin for loose conditions.
• Keep the front wheels on the ground under heavy acceleration
on high-bite surfaces.
• Protect the drivetrain from sudden impact or shock loads (such
as landing from a jump with the engine under acceleration.
Caution
: Do not tighten the slipper to the point of eliminating
slippage. This can permanently damage the slipper components,
and the components of the drivetrain.
If you have questions or need technical assistance, call Traxxas at
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)
www.TRAXXAS.com
Traxxas, 1100 Klein Road, Plano, TX 75074, Phone: 972-265-8000, Fax: 972-265-8011, e-mail: [email protected]
Transmission Exploded View
This diagram shows the transmission with this kit installed. Stock parts are in gray.
Installation Complete
5352
4992X
4991
4991
4927X
4927X
M4/14.5
5x11 BB
5116
4997
(Blue ring)
Black Pawl
5x8BB
5114
4994
4985
10x19x5 BB
4889
4897
4x5 GS
5116
5x11 BB
5116
5x11 BB
5116
5x11 BB
4986
4984
4988
6x8x0.5 TW
3982
4994
5x8x14
Spacer
2745 3.0 NL
2746 3x6 MW
8x12x0.5 TW
4996
4989
4996
4996
5116
5x11 BB
4987
4993
4995
4995
4990
Shiny
Pawl
1985
5x8x0.5 TW
5116
5x11 BB
5116
5x11 BB
4998
(Black ring)
5x8 BB
5114
4949X
4949X
4991
3x10 RST
2675
3x10 RST
2675
3x10 RST
2675
4966X
4927X
4964
4964X
4927X
M4/18.5
4965
4965
2585
3x20 CS
4989 3x7 MW
2675
4965
3x15 CS
4967
3x4 GS
4967
4967
5x10x0.5 TW
4995
M3/12
4995
4996
4949X
4949X
5352
5351
5352
5352
5352
4472R
5352
4147 5.0NL
5351
5116
5x11BB
3932
3x6 FCS
