SC250X FLOOR GRINDER
| OPERATIONS MANUAL
3
Traxx Constructions Products Operations Manual – SC250X Floor Grinder 3
1. INTRODUCTION & DESCRIPTION
This manual is intended to provide operation and service information necessary for the Nsafe and efficient use of the
Floor Grinder.
Operating or servicing the unit other than in accordance with the instructions given may subject the machine to
conditions beyond its capability, which may result in machine failure or personal injury.
IMPORTANT
1. Read the entire operating manual carefully before attempting to use the floor grinder. Special attention
should be paid to the section entitled ‘Safety Precautions’.
The Floor Grinder is a sturdy, reliable and easy to use machine.
The Floor Grinder is fitted with 2.2kW single phase motor. This motor offers a direct drive to the grinding plate with the
incorporation of a flexible coupling between the motor and the plate.
The shroud system is unique in design, automatically adjusting to suit segment height and floor angle. This shroud
system, when used in conjunction with an appropriate industrial vacuum unit, eliminates dust loss during grinding. The
shroud has 2 removable sections to enable the operator to grind close up to the wall etc. Please note that dust loss is
possible when this section is removed.
The floor grinder comes complete with a water connection for wet grinding should this be required. This incorporates a
ball valve allowing the operator to regulate the water supply to obtain the best grinding results.
The floor grinder has a foldable handle which enables it to be easily transported in the trunk of most small vehicles. The
rear wheels can also be extended outward should the operator want more stability from the grinder. This requires the
use of a 10mm wrench. The operator can also raise or lower the height of the handle to maximize their comfort when
using the grinder.
And the new designed lifter system makes operator handy to use.
2. TECHNICAL DATA
Motor HP
3hp
Motor KW Rating
2.2kW
Motor RPM
1410rpm
Unit Weight
48kg
Plate Type Standard
250mm plate or Cub Shoe
Plate Bolt Types
M12 x 25 Countersunk socket head
Main Construction
Powder Coated Steel
Ensure all re-tipped and new grinding plates are properly balanced.
Dec 2017
1. INTRODUCTION AND DESCRIPTION
2. TECHNICAL DATA
