8
■
Extension cable
If an extension cable is required, it must
have a sufficient cross-section so as to
prevent an excessive drop in voltage or
overheating. An excessive drop in voltage
reduces the output and can lead to failure
of the motor. The following table shows you
the correct cable diameter as a function of
the cable length for this machine. Use only
approved extension cables. Never use two
extension cables together. Instead, use one
long one.
■
UNPACKING
Carefully remove the tool and all loose
items from the shipping container.
Retain all packing materials until after you
have inspected and satisfactorily operated
the machine.
■
CARTON CONTENTS
1. Stone Grinder machine
2. Instruction manual
3. Side handle
4. 125mm backing plate
DO NOT OPERATE THIS TOOL UNTIL YOU
R E A D A N D U N D E R S T A N D T H E E N T I R E
INSTRUCTION MANUAL
■5"&7", To install a the Backing Plate and
Diamond Polishing Pad, Diamond Plate
1.
Unplug the machine.
2.
Thread on the Backing Plate onto the
arbor. Press the Spindle Lock and
rotate the arbor until it engages.
Tighten backing plate.
3.
Select the desired grit of diamond
polishing pad (not included) and
adhere to the Backing Plate by
pressing together the hook & loop
backings.
4.
Removal is the opposite of assembly.
Total Extension Cord Size (AWG)
Cord Length (feet)
25
16
50
12
100
10
150
8
200
6
Spindle Lock
Backing Plate
Diamond Polishing Pad
Out flange
Diamond Plate
Inner flange
