11
Main Menu
5
②
Add
a. Select <Add> with
VOLUME /
On the front panel, and press
ENTER
, the new
satellite will be display ed:
5.3 Installation
b. LNB Power
In case you need to supply 13/18V DC to LNB, Select (13/18V) with
VOL /
.
d. DiSEqC
If the DiSEqC box is DiSEqC 1.0, positioner should be set Disable, then select an
tenna input DiSEqC A~DiSEqC D,Butst A or Burst B. If the DiSEqC box is DiSEqC
1.2, positioner should be set Enable, then select Moto to set some data.
③
Rename
a. Select <Rename> with
VOLUME /
On the front panel.
b. Select a satellite you want to Rename with
CHANNEL
▲ ／
q
, and press
ENTER
,
you will see the sub-menu as shown in the following figure.
13
http://www.traxis.co.uk
