0
Assemble Base
VERY IMORTANT
Before assembly please check to make sure all parts
are present. If something is missing, please contact
our office on the phone at 479-474-3460 or over
email at [email protected]
First, take the front bar (B) and insert
it into the side of the I-beam (A) with
the yellow sticker.
The caster sockets
should face towards
the rest of the I-bea m as shown by
the red circles.
(H x2)
Next, take the back bar (C)
and insert it into the other
side of the I-beam (A). The
caster sockets should face
away from the front beam
as shown by the red circles.
(H x2)
\
\
Next, attach the I-beam and front bar
using 2x long 13mm bolts (H) and 2x
13mm nuts (F). Make sure to tighten the
bolts enough so that the front bar has no
wiggle room.
Finally, secure the back bar using 2x
long 13mm bolts (H) and 2x 13mm
nuts (F). Make sure to tighten the
bolte enough so that the back bar
has no wiggle room.
