TRAVOLA
9
Product faults and elimination methods
№
Description
Cause
Solution
1
Unable to close lid.
The installation of gasket is not correct.
Calibrate the position of the gasket.
The ball float valve on splint is jammed.
Gently poke the valve plate.
2
Unable to open lid.
The ball float valve doesn’t fall.
Use a toothpick to gently poke the valve.
3
The air leakage of
pot cover
The installation of gasket is not correct.
Calibrate the position of the gasket.
Gasket has stains.
Clean the gasket.
Gasket is damaged.
Replace the gasket.
The cover is not sealed.
Cover the lid according to the manual.
4
The air leakage of
the ball float valve
The gasket of the ball float valve has
stains.
Clean the gasket of ball float valve.
The gasket of the ball float valve is
damaged.
Replace the gasket of ball float valve.
5
The ball float valve
is not rising.
Water and food don’t reach the
minimum limit.
According to instructions, use the correct
amount of water and food.
Air leakage of pot cover or discharge
pressure valve.
Send the electric pressure cooker to the
maintenance center to check.
6
E1
Open circuit of the sensor
Send the electric pressure cooker to the
maintenance center to check.
7
E2
Short circuit of the sensor
Send the electric pressure cooker to the
maintenance center to check.
8
E3
Overheating
Send the electric pressure cooker to the
maintenance center to check.
9
E4
Low temperature
Send the electric pressure cooker to the
maintenance center to check.
Technical features
：
Model No.
Power
Supply
Rating Power
Volume
Working
Pressure
Limit
Pressure
Holding
Temperature
Pre-set
CR-38
220V
1000W
6L
0-70Kpa
90Kpa
60-80
℃
0.5-24Hours
