Small Flush Wood Wilmington Face
Installation Instructions
96300207
Page 2 of 4
17601808.docx — 9/23/13
© Travis Industries, Inc.
3
Place the face upright. Position the center clip so it is snug against the ashlip. Tighten the two nuts
on back of the face to secure the center of the ashlip to the face (11/32” wrench).
Attaching the Face to the Insert
WARNING
: Unplug or disable power to the appliance prior to attaching or removing the face.
1
Pull the air control and bypass out fully.
2
Unscrew the bypass rod from the bypass yoke (make sure to detach the handle and rod as one
piece). Unscrew the air control rod from the air control.
