Wall Thermostat - Gas/Pellet
Part # 99300650
Page 2 of 2
10850 117th Place N.E. Kirkland, WA 98033
Printed February 3, 2003
Thermostat Placement and Installation
1
Determine a location for the thermostat that is within range of the 20' length of thermostat wire. It should be centralized in
the room and away from the heater. The wire may be routed externally on the wall or behind the wall (preferred). Run the
thermostat wire to this location. Use nylon ties, if necessary to keep the wire from contacting any hot portions of the heater.
2
Follow the directions below to attach the thermostat and thermostat wires.
50 60 70 80 90
50 60 70 80 90
Robertshaw
Run the thermostat wires
through the wall (cut off excess
wire, leaving 6” of slack).
Pull the cover off the thermostat
Expose 1/2” of wire and
attach to these two posts.
Standard
Screwdriver
Attach the thermostat to
the wall through these
two holes.
