GreenSmart™ Remote – Export Version
SKU 99300699 (NG) SKU 99300698 (LP)
Page 13 of 15
9/25/09 - 17601590
© Travis Industries, Inc.
Manual On-Off / Smart Thermostat / Standard Thermostat
Use the thermostat button to cycle through the three thermostat settings (see Figure 35).
OFF
ON
SMART
ON
F
Look here for the
thermostat setting.
Press the thermostat button to cycle
through the thermostat settings.
Figure 35
MANUAL ON/OFF
– The burner will turn on and off using the remote (see Figure 36). Press the
On/Off button to control the burner. When off, the display will only show the current temperature.
OFF
F
When in manual setting, the
word “OFF” will appear here.
MAX
Figure 36
SMART THERMOSTAT
– While in smart thermostat, the transmitter will control the burner to
achieve the target temperature (see Figure 37 below). Flame height will be adjusted up or down
to allow operation without turning the burner on and off (also called “smart modulation). To adjust
the target temperature, press the up and down buttons until a suitable temperature is achieved.
ON
F
When in standard thermostat
setting, the word “ON” will
appear here.
This is the target temperature
on the read-out. Use the up
or down buttons to adjust the
target temperature.
Figure 37
STANDARD THERMOSTAT
- While in standard thermostat setting, the transmitter will turn the
burner on and off to achieve the target temperature (see Figure 38 below). To adjust the target
temperature, press the up and down buttons until a suitable temperature is achieved.
F
When in smart thermostat
setting, the word “SMART”
will appear here.
This is the target temperature
on the read-out. Use the up
or down buttons to adjust the
target temperature.
SMART
Figure 38
NOTE: if the transmitter batteries go dead while in thermostat setting (standard or smart), the appliance
will shut off after approximately 24 hours.
