manualshive.com logo in svg

Travis Industries DVS EF Insert, Руководство пользователя

Поделиться
Скачать
Travis Industries DVS EF Insert Скачать руководство пользователя страница 7

Installation  

(for qualified installers only)

7

© Travis Industries

4041213

1 0 0 - 0 1 1 5 0

Installation Warnings:

!

Failure to follow all of the requirements may result in property damage, bodily injury, or even death.

!

This heater must be installed by a qualified installer who has gone through a training program for the
installation of direct vent gas appliances.

!

This appliance must be installed in accordance with all local codes, if any; if not, follow ANSI Z223.1
and NFPA 54(88) in the USA and B-149 in Canada.

!

In Manufactured or Mobile Homes must confirm with: In USA, Manufactured Home Construction and
Safety Standard, Title 24 CFR, Part 3280; In Canada, CSA Z240.4 and Gas-Equipped Recreational
Vehicles and Mobile Housing.  This appliance may be installed in Manufactured Housing only after the
home is site located.

!

The DVS Insert is designed to operate on natural gas (NG) or propane (LP).

!

All exhaust gases must be vented outside the structure of the living-area.  Combustion air is drawn
from outside the living-area structure.

!

Notify your insurance company before hooking up this heater.

!

The requirements listed below are divided into sections.  All requirements must be met
simultaneously.  The order of installation  is not rigid – the qualified installer should follow the
procedure best suited for the installation.

Items Required for Installation

•

Direct Vent Adapter (Simpson Duravent Part # 923GK)

•

Face

•

Gas Hookup Equipment

•

Surround Panels (Optional - see “Installation without Surround Panels”)

•

3”  UL 441 Gas Liner

•

Direct Vent Cap (Simpson Duravent Part # 991)

Packing List

•

DVS Insert

•

Log Set (Log Set, Coals, and Embers)

•

Owner's Manual

•

Propane Conversion Kit

•

Two Leveling Bolts

•

8" Pipe Inlet (3/8" dia.)

• 

"Fireplace Altered" tag (attach to the fireplace)

Items Packed with the Face

•

Face (with  attachment hardware)

•

Face Installation Instructions

Order of Installation

1

If the heater is to use propane, install the propane conversion kit (see page 31)

2

Install gas line into the fireplace (do not connect to unit)

3

Position the heater (see "Insert Placement")

4

Connect the gas line and gas vent to the appliance.

5

Install the optional surround panels and trim.  Attach the on/off switch.

6

Follow the instructions under "Finalizing the Installation" on pages 17 through 20.

Содержание DVS EF Insert



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды