Travis Industries Avalon 900 PI, Руководство пользователя

Страница: 32 / 50

P
AGE
32
O
PERATING
Y
OUR
H
EATER
(C
ONTINUED
)
NOTE : Every bag of pellets you use may be different. Certain pellets will be
heavier and won't want to move around in the firepot. Some pellets
will be wet, and take longer to burn. While other pellets will be
"dirtier" and produce a darker smoke. Pellets will even vary from
bag to bag. If uncertain on where to set the A
IR
C
ONTROL
, it is best
to pull the A
IR
C
ONTROL
out too far then to push it in too far .
HINT : Generally, the label on the A
IR
C
ONTROL
should be showing RED
on HIGH, ORANGE on MEDIUM, and YELLOW on LOW.
Step 3: Adjust the FAN Dial
The Fan dial controls the amount of heated air that is blown out of the heat exchange tubes above
the door. Generally, the higher the B
URN
R
ATE
the higher the FAN dial should be set.
T
URNING OFF THE
H
EATER
To turn the heater off, switch the POWER button to "OFF".
OFF
POWER
ON
WARNING : Do not unplug the heater to turn it off. This heater relies upon
electricity to push the flue gases out the pellet vent Ð unplugging it
may lead to smoke in your room.
N
ORMAL
O
PERATING
S
OUNDS
Exhaust Fan
The flow of exhaust gases
through this air-cooled
induction motor creates a
steady low-pitched hum.
Convection Fan
The modern high
efficiency fan may have
a hum or pulsating
sound, particularly on
the "HIGH" setting. This
sound may change as
the FAN dial is varied.
Heat Exchanger Tubes
You will hear air being forced
through these tubes by the
convection fan.
Control Box
This part can produce a
clicking sound as it turns
the auger motor on and off.
Auger Motor
When feeding pellets
you may hear the
intermittent buzz of
this motor running.
Firepot
As pellets are fed to the
firepot, a light clicking
sound may be heard.