Large Flush Wood Hybrid-Fyre Insert:
Cypress Face Installation
(96400539)
Page 3 of 7
17601689 - Printed 4/10/12
© Travis Industries, Inc.
3. Remove the bypass rod from the fork in the insert, and set aside for later use.
4. Attach the face to the insert by inserting the tabs located on the face into the vertical slots located in the
1-piece panel.
Figure
9:
Attaching
the
face
5. On the left side, connect the Molex connector from the face to the Molex connector on the insert.
Figure
10:
Connecting
the
Molex
connectors
6. Tuck excess wires into the cavity near the blower. Make sure they do not contact hot (the bottom of the
firebox) or moving components.
Figure
11:
Tuck
excess
wires
